|
M&B Engineered Solutions offers customers a
cost effective alternative to the high-priced project costs usually
associated with vibration instrumentation and condition monitoring system
installations.
Whatever machinery you
need to monitor - from large steam turbine / generator sets with 12
bearings, to 4-bearing boiler feed pumps, to small ANSI or API-style
overhung pumps - we can provide you with the correct transducers, monitors,
system design, and installation services to accurately capture the machinery
information you need. We can design, install
and service your systems, and save you money in the process.
Contact us with
any questions you may have. |
|
We provide a full range of professional
design and installation services for all types of measurements including
proximity probes for radial vibration, thrust and speed; as well as case
mounted accelerometers for seismic measurements. Our installations cover all
variants of industrial reciprocating and turbo-machinery, and our turnkey
projects are accomplished through proper coordination of electrical and
mechanical disciplines under one project site manager.
From a single cooling
tower monitoring system, to a complex multi-bearing Turbine Supervisory
Instrumentation system, we have the knowledge and expertise to install your
system to the highest standards and meet and exceed Industry Best
Practices. Our experience results from many years of project work through
Bently Nevada Corporation, a company that demanded ‘quality-first’ in its
installations. Today, we continue that tradition with our professional cost
effective solutions to your machinery transducer retrofit and monitoring
system needs.
|
Vibration monitoring systems are precision
equipment, used not only to trend data, but to provide an important data for
complex diagnostics and operational decisions. We believe the monitoring
system must therefore provide the right information, from the right
transducers, and in the right format. As such, every M&B project is reviewed
by our diagnostics engineers – ensuring if your machine develops a problem,
the monitoring system will accurately detect that problem at the earliest
stages.
Factors such as bearing design, machine geometry, shaft speed, machinery
foundation, and your budget all influence the choice of transducers and
system utilized, and we strive to ensure that the right information is
provided as efficiently & economically as possible.
We accommodate all aspects of monitoring
system requirements, from AutoCAD® electrical and mechanical design
packages, to hardware ordering, onsite project management and installation
and calibration of new systems. We are well versed with many vibration
monitoring system vendors such as Bently Nevada, SKF/Dymac, Metrix,
Shinkawa, DLI Engineering, Ludeca, and others. We can recommend, design and
install a system that cost-effectively meets your needs.
|
|
M&B provides a full
range of instrumentation calibration & maintenance services, including:
|
Transducer Maintenance & Verification |
Condition Monitoring Systems
Maintenance & Verification |
Vendor Systems Serviced |
|
Calibration curves &
response verification |
Calibration of vibration,
thrust, speed, temperature and other system modules & measurement types |
Bently Nevada 3300 &
3500
Machinery Monitoring & Protection Systems |
|
Loop checks verifying
continuity & routing |
Relay trip circuit logic
programming
& functionality checks |
Bently Nevada System 1
Configuration, Optimization & Auditing |
|
Transducer installation
design reviews |
Reviewing & establishing
alarm set points |
Transducers from Bently Nevada, Metrix,
PCB/IMI, CTC, SFK and others |
|
Repair & Replacement of
Vibration Transducer Systems |
Modbus Register Map
Programming & Integration with plant
networks |
Emerson / CSI 4500
Machinery Health Monitors |
|
RTD, Thermocouple & Loop Powered Device
testing |
Software configuration &
updates |
SKF VM600, M800A, CMCP-500
Machinery Protection Systems |
|
|
|
And others..... |
M&B also performs
customized in-plant training for your personnel. From Operator & User
training, to Transducer Maintenance & Calibration, we can ensure you receive
the highest value from your investment.
|
